The one-stop general engineering and welding repairs shop


Threads stripped in bottom bracket, Build up with weld, bore out, re-tap.Cut hole in Fireblade Fuel tank to fit new type breather.Bicycle Cross bar Vandalised crushed and cut.New Crossbar fitted and welded into place.BeforeAluminium Diesel Tank off a barge Repaired.

Stainles Keg Turned into a Wine ContainerCut Stainless Exhaust removed damaged Baffle PlateRe - Weld Stainless Exhaust and Polish.Weld cracks in Cast Iron Turbo Housing Squash ball mould, cracked in high pressure steam channel.Grind out crack in preperation for Welding. Due to high pressure steam, reinforcing plates needed. Car drive shaft, hardened splines damaged. Cut off end off and replace.Machine new end and press into driled out shaft. Drill hole into hardened shaft and then press new head in. Weld new head into Shaft. Make clamp parts, no two sides the same.

PHIL and TEDS pram broken at the back crossbar. Welded with 5356 Aluminium Alloy TIG Rods.

Bike with top broken off saddle tube of frame.Machine new Collar and weld onto original frame.Mercedes Piston Valve punched a hole in it.

Weld piston top. Machine the pistons top surface. Machine Photo holder from Aluminium Plate.

Make Aluminium Protoype bicycle frame. Machine steering head, Machine coping in tube. Weld tubing and insert Nylon bush.Remove Down tube and replace with larger one.Larger tube will take botton operated gas damper rod.Gas damper will allow for raising and lowering of saddle by button.

Mavic wheel cracked along rim.Car Rad Lamda sensor on the wrong side.Machine mounting plate and weld onto opposite side.